Chinese

1688

Industry Knowledge

Jinshun News

Home page

[Zhen Shun Plastics] Flame-retardant PC vs. Standard PC: Do you know the differences between them?

Release time:

2024-08-08 14:21

Source:

Network

　　Flame-retardant PC (polycarbonate) and ordinary PC differ significantly in terms of material properties, application fields, safety, and environmental friendliness. Today, we’ll explore the distinctions between these two materials.
　　The main differences between flame-retardant PC and ordinary PC lie in the following aspects:
　　I. Material Properties
　　Flame-retardant PC is produced by adding flame retardants to conventional PC, thereby enhancing the material’s fire-resistant performance. The addition of flame retardants alters the internal structure of PC, enabling it to form a char layer at high temperatures, which effectively inhibits flame spread and the release of combustion products. As a result, flame-retardant PC boasts a higher flame-retardant rating and a lower burning rate compared to conventional PC.
　　In terms of physical properties, the hardness, strength, and toughness of flame-retardant PC are similar to those of ordinary PC. However, due to the addition of flame retardants, the density and hygroscopicity of flame-retardant PC may increase slightly. Moreover, flame-retardant PC exhibits superior heat resistance and weatherability compared to ordinary PC, enabling it to maintain excellent performance even in high-temperature and harsh environmental conditions.
　　II. Application Fields
　　Due to its excellent flame-retardant performance, flame-retardant PC is widely used in fields with high fire safety requirements. For example, in the electronics and electrical industry, it is employed in circuit boards, connectors, sockets, and other components; in the construction materials sector, it is used for fire-rated panels and fire-resistant windows. Moreover, flame-retardant PC is also applied in high-end sectors such as transportation and aerospace, providing strong assurance for the safety and reliability of these products.
　　General-purpose PC is widely used in various plastic products in daily life, such as mobile phone cases, water bottles, and eyeglass lenses. Thanks to its excellent transparency, impact resistance, and processability, general-purpose PC occupies an important position in the plastics industry.
　　III. Safety
　　The flame-retardant properties of flame-retardant PC enable it to effectively slow down the spread and extent of a fire, thereby reducing losses to people and property in the event of a fire. Moreover, during combustion, flame-retardant PC produces less smoke and toxic gases, which helps safeguard the safety of personnel.
　　In contrast, conventional PCs are highly flammable in the event of a fire, allowing flames to spread rapidly. Moreover, during combustion, they produce large amounts of smoke and toxic gases, posing a threat to both people and the environment. Therefore, in places with stringent fire safety requirements, Flame-retardant PC Become a safer choice.

　　IV. Environmental Friendliness
　　As environmental awareness continues to rise, the eco-friendly performance of materials is receiving increasing attention. Flame-retardant PC requires the addition of flame retardants during both production and use, which may have certain impacts on the environment. However, with advances in technology and increasingly stringent environmental regulations, the types and quantities of flame retardants are being continuously optimized to minimize their environmental impact.
　　As a mature plastic material, ordinary PC boasts relatively well-established production and recycling technologies, resulting in a relatively minor environmental impact. However, in terms of waste management, the recycling rate of ordinary PC still needs to be improved to reduce its environmental pollution.
　　V. Development Trends
　　With continuous advancements in technology and increasing environmental requirements, both flame-retardant PC and conventional PC are undergoing ongoing development and improvement. Flame-retardant PC Continuous optimization will be carried out in terms of flame retardancy, physical properties, and environmental friendliness to meet a broader range of application needs. Meanwhile, the research and development and application of new environmentally friendly flame retardants will become a key direction for the flame-retardant PC industry.

　　Standard PC will continue to be optimized in terms of transparency, impact resistance, and processability to meet the needs of an even broader market. Meanwhile, as recycling technologies keep advancing, the recycling rate of standard PC will improve, further reducing its environmental impact. In summary, the key difference between flame-retardant PC and standard PC lies in their flame-retardant performance. The choice of material should be made based on the specific application scenario. As a Tier-1 distributor for LG Chem, Zhen Shun Plastics can provide customers with convenient and efficient supply services for both standard PC and flame-retardant PC materials. If you’re interested, don’t hesitate—give us a call at 139 2640 0876 today!

[Zhen Shun Plastics] The New Favorite in the Plastics Industry: PCR Materials—How Much Do You Know About Them?

[Zhen Shun Plastics] Unveiling the Diverse Application Fields of PBT Material

Every departure is an opportunity to encounter even more breathtaking scenery; every journey together is a chance to forge deeper, warmer bonds. In 2025, Zhen Shun Plastics’ annual group tour arrived as scheduled. Leaving behind the hustle and bustle of work, we set off toward Changbai Mountain in Northeast China, drawn by our longing for its majestic mountains and rivers. During our four-day trip, we journeyed from the humid warmth of Lingnan to the crisp freshness of northern lands, stepping from the urban clamor into nature’s serene tranquility. Every leg of the journey was filled with surprises, and every moment was worth treasuring. First Stop: Changbai Mountain—Heavenly Lake Bestows Its True Beauty On the day of departure, the sunshine was just right, and our team began our journey to Heavenly Lake. Along the way, we were deeply captivated by the stunning scenery. As the altitude gradually rose, the distant Tian Shan mountain range came into view. The rolling hills, set against the blue sky, looked majestic and awe-inspiring. After much anticipation, we finally arrived at Heavenly Lake. What luck! It was our first time visiting Changbai Mountain, yet we were greeted with the sight of Heavenly Lake itself! The crystal-clear, deep-blue waters instantly amazed everyone present. Exclamations of wonder and cheers echoed through the air. Everyone rushed to get closer to this "peerless beauty," snapping photos to capture this unforgettable moment. The magic and beauty of nature always touch our hearts directly. Photos simply can’t convey the震撼 (shocking) power of the real scene—so it truly is said, “Seeing is believing.” You really have to see these sights with your own eyes. The blue sky, white clouds, mountains, and lakes—this very moment perfectly embodied the idea that “life is an open wilderness.” After admiring Heavenly Lake, we took another off-road vehicle back to the trailhead, then switched to an eco-friendly bus to reach the waterfall attraction. The Changbai Mountain Waterfall was truly spectacular—the water roared fiercely, its sound echoing for miles. It looked like a giant silver ribbon suspended high above the canyon. Whether viewed from afar or up close, the waterfall was breathtaking. Beneath the falls, the immense impact created swirling mist, making the scene absolutely magnificent. The river flowing down the waterfall ebbed and flowed, winding and twisting, stirring our senses. Second Stop: Guangdong Village—Stepping Into a Pastoral Poem of Korean Ethnic Charm As dusk approached, we arrived at a Korean ethnic village. The setting sun was gently coloring the land with a soft glow. Gray tiles and white walls turned orange, and the eaves were edged with gold—a scene straight out of a folk painting. We stepped into a local home, where the hosts warmly welcomed us and shared with us some of their local culinary customs. Third Stop: Tumen Border Crossing—A Glimpse of Two Countries at a Glance Tumen faces Namyang, North Korea, across the river. Though separated by just a single river, it feels like two entirely different worlds. Standing on the banks of the Tumen River and gazing across, we could clearly see the houses and streets of Namyang, North Korea. Scenes of daily life unfolded before our eyes through the binoculars. Listening to our guide share stories about the neighboring country’s customs and traditions, and watching the scenes across the river, we, as Chinese citizens, felt a strong sense of happiness and pride welling up inside us. We became even more grateful for our country’s peace and prosperity. Fourth Stop: Yanji—Folklore Park—Playing Princess of Yanji for a Day “You really must visit Yanji! Take a stroll in the evening breeze of the university town, put on an elegant long dress, and freeze time in the lantern-lit Folklore Park, becoming a princess of Yanji for a day.” Yanji, with its unique ethnic charm and immersive cultural experiences, has become a “fairytale city” in the hearts of countless tourists. From the snowy winter to the lush spring and summer, this place weaves a dreamlike journey through time with traditional costumes, lanterns, and a bowl of ginseng chicken soup. As our four-day trip in Northeast China drew to a close, we found ourselves immersed in the lantern-lit ambiance of Yanji’s Folklore Park. From the breathtaking azure of Heavenly Lake on Changbai Mountain to the misty spray from the waterfall dampening our clothes; from the warm smiles of Korean families in Guangdong Village bathed in the sunset, to the surge of patriotism we felt when gazing across the Tumen River at our neighbor country—each moment was like a sparkling pearl, strung together to form our cherished memories as the Zhen Shun Plastics family. This journey not only allowed us to take a break from the busy pace of work but also deepened our understanding of each other amidst the mountains and culture, strengthening our team spirit even further. Those moments—cheering together by Heavenly Lake, taking photos of each other in the Folklore Park, sharing delicious meals around the table—all will remain the warmest source of strength in our hearts. This wonderful experience wouldn’t have been possible without the company’s thoughtfulness and care. Thank you, Zhen Shun Plastics, for always putting the happiness of every employee first and creating opportunities for us to connect with nature, embrace culture, and strengthen our bonds through our annual group tour. This heartfelt gesture has made us feel the warmth of a big family and filled us with even greater enthusiasm and anticipation for the future. Moving forward, we’ll carry the insights and emotions from this journey with us, approaching our work with renewed vigor and unity, standing side by side with the company as we set off toward new horizons and create an even brighter tomorrow. We’re eagerly awaiting the next exciting chapter of our journey! About Zhen Shun Zhen Shun Plastics has become an authorized Tier-1 distributor for LG Chem, specializing in the sale of LG Chem’s full range of plastic products: (1) Modified engineering plastics, including modified PC, PC/ABS, PP, PBT, PBT/ABS, ABS+GF, PA6/66, light-diffusing PC, PPO, PPS, POM, TPEE, etc., covering various grades and specifications such as flame-retardant, glass-fiber reinforced, long-glass-fiber reinforced, and mineral-filled (TALC); (2) General-purpose plastics, including ABS (flame-retardant, transparent, high-gloss, electroplated, scratch-resistant, heat-resistant, high-impact, high-flow, etc.), PMMA, ASA, SAN, PP, PE, PS; (3) Post-consumer recycled (PCR) environmentally friendly materials, including PCR-ABS, PCR-PC, PCR-PC/ABS, PCR-PP; (4) Modified additives, including impact modifier MBS and toughening agents, etc. Mobile/WeChat: 139 2640 0876. We welcome calls and emails for inquiries and discussions. We are dedicated to tailoring personalized products to meet our customers’ needs and providing comprehensive material solutions.

[Zhen Shun Plastics] Detailed Case Studies on the Application of LG Chem’s UV-Resistant Plastics

LG Chem’s UV-resistant plastics, with their outstanding UV resistance, weatherability, and physical performance, have found extensive applications across multiple industries. Below, our editor from Zhenshun Plastics has compiled several case studies for you—let’s take a look together!

[Zhen Shun Plastics] Innovative Engineering Plastics: Paving the ‘Carbon’-Focused Path for the Future of Mobility

Under the wave of green transportation and low-carbon living, the automotive industry is undergoing a transformation toward electrification, intelligentization, and decarbonization at an unprecedented pace. In this transformative journey, lightweight, sustainable materials have become the key to driving the future of mobility. Today, let’s join Zhen Shun Plastics as we explore how eco-friendly, innovative engineering plastics are injecting new green momentum into the automotive industry.

[Zhenshun Plastics] How high a temperature can modified PP materials withstand? Understand their temperature resistance and applications in one article!

Just how high a temperature can modified PP actually withstand? In which fields does it truly shine? In this article, the editor from Zhenshun Plastics will provide you with the answers one by one!

Guangzhou Zhenshun Yuanbo 2024 Annual Awards Ceremony: A Moment of Glory, Together We Forge Greatness!

Zhen Shun Yuan Bo is now recruiting talented individuals! We’re looking for you—someone who’s passionate about sales and familiar with the plastics industry—to join our plastics sales team and together, let’s create a bright future!

[Zhenshun Plastics] Why is it said that flame-retardant PC/ABS alloys are suitable for mobile phone chargers?

Advantages of Using Flame-Retardant PC/ABS Alloy in Mobile Phone Charger Bases